Aram International

Procurement Services

We offer a wide range of material and specifications covering carbon, alloy and stainless steel in pipe and tube. Our real-time inventory management, full mill document and certification and continuous quality control make your project procurement smoother and more cost-effective.

Seamless and Welded Carbon Pipe & TubeSeamless and Welded Alloy Pipe and TubeStainless Steel Pipe and TubeAPI SPEC 5L

Our Products

Seamless and Welded Carbon Pipe & Tube

Carbon steel is more commonly used than any other metal, and has long been admired for its versatility and low cost. As a specialist in scheduled and non-scheduled heavy wall pipe and tube, Federal Steel Supply stocks a complete size range of carbon steel pipe and tube.  We offer multiple grades of carbon steel covered by ASTM, ASME and API specifications.

Seamless and Welded Carbon Pipe & Tube

Seamless and Welded Carbon Pipe & Tube

Seamless and Welded Carbon Pipe & Tube

Size range: ½” nominal through 60” OD, Wall Thickness up through 4” thick & heavier upon request, Specifications & Grades: A-106 Grade B/C, SA-106 Grade B/C, A-333, Grade 1/6, API 5L & X-Grades through X-80, A-53 Grade B, SA-53 Grade B, A-519, A-513 Type 5 (DOM), Rolled and Welded A-671 & A672

Seamless and Welded Alloy Pipe and Tube

Seamless and Welded Alloy Pipe and Tube

Seamless and Welded Alloy Pipe and Tube

Size range: ½” nominal through 60” OD, Wall Thickness up through 4” thick& heavier upon request, Specifications & Grades: SA-335 P5, P9, P11, P22, P91, SA-213 T5, T9, T11, T22, T91, A519 4130, 4140/42, Rolled & Welded A-691

Seamless and Welded Alloy Pipe and Tube

The benefits of alloy steel pipe include its tensile strength, yield strength, fatigue resistance, toughness, and wear resistance. As suppliers of seamless and welded alloy steel pipe, Federal Steel specializes in ‘chrome moly’ SA335 piping in grades P5, P9, P11, P22, and P91. Chrome moly power piping is used extensively in power plants throughout the world.  In addition to SA335, other specifications we offer include A519 and rolled and welded pipe in A-691. Alloy piping products are available in outer diameters through 60” (OD) and up to 4” wall thickness.

Stainless Steel Pipe and Tube

Stainless steel pipe has many remarkable attributes including corrosion resistance, high strength, durability, and machinability. Federal Steel stocks stainless steel piping in outer diameters (OD) of ¼” – 48”. We offer stainless steel seamless steel pipe and welded pipe in wall thickness up through 1.500”.

Stainless Steel Pipe

Stainless Steel Pipe

Stainless Steel Pipe

Size range: ¼” nominal through 48” OD, Wall Thickness up through 1.500” thick, Specifications & Grades:

SA-312, SA-376, SA-213, Grades: 304, 316, 321, 347, Grades also available in L and H

API 5L X52 X56 X60 X65 and X70 - PSL1 PSL2

API 5L X52 X56 X60 X65 and X70 - PSL1 PSL2

API 5L X52 X56 X60 X65 and X70 - PSL1 PSL2

Grades covered by this specification are A25 ,A ,B (and the following “X” Grades), X42, X46, X52, X56, X60, X65, X70, X80.  The two digit number following the “X” indicates the Minimum Yield Strength (in 000’s psi) of pipe produced to this grade.

API 5L X52 X56 X60 X65 and X70 - PSL1 PSL2.

The API SPEC 5L specification provides standards for pipe suitable for use in conveying gas, water, and oil in the natural gas and oil industries. The API SPEC 5L covers seamless and welded steel line pipe. It includes plain-end, threaded-end, and belled-end pipe, as well as through-the-flowline (TFL) pipe, and pipe with ends prepared for use with special couplings. We offer a full range of API 5L X52 PSL-1 & PSL-2 line pipe in seamless.

OUR PARTNERS

General Material Specifications and Sizes We Offer

Pipe & Tube Grade and Specification

Grade / Size / Spec

Grades B/C

 Sizes

NPS 1/8″ to NPS 48”
Wall thickness: Schedules 10 through 160, STD, XS, XXS.

*Commonly requested unscheduled walls up to 4” and certified minimum wall items

Chemical Properties %

C, max. Mn P, max S, max Si, min Cr, max Cu, max Mo, max Ni, max V, max
Grade A * 0.25 0.27 – 0.93 0.035 0.035 0.10 0.40 0.40 0.15 0.40 0.08
Grade B 0.30 0.29 – 1.06 0.035 0.035 0.10 0.40 0.40 0.15 0.40 0.08
Grade C 0.35 0.29 – 1.06 0.035 0.035 0.10 0.40 0.40 0.15 0.40 0.08

*For each reduction of 0.01% below the specified carbon maximum, an increase of 0.06% manganese above the specified maximum will be permitted up to a maximum of 1.35%.

 Mechanical Properties                                

Grade A          Grade B          Grade C

Tensile strength, min, psi (MPa)                  48,000 (330)    60000 (415)     70,000 (485)

Yield strength, min, psi (MPa)                     30,000 (205)    35,000 (240)    40,000 (275)

(Note: This is summarized information from ASME Specification A106. Please refer to the specific Standard or Specification or contact us for more details.)

Grade / Size / Spec

Grade B

Sizes

NPS ¼” to NPS 26” O.D.

Wall thickness: Schedules 10 through 160, STD, XH and XXH
Commonly requested unscheduled walls up to 4” and certified minimum wall items

Chemical Properties %

Grade

C,

max

Mn, max

P,

max

S,

max

Cu*,

max

Ni*, max

Cr*, max

Mo*, max

V*, max

Type S(Seamless) 

A 0.25 0.95 0.05 0.05 0.40 0.40 0.40 0.15 0.08
B 0.30 1.20 0.05 0.05 0.40 0.40 0.40 0.15 0.08

Type E

(Electric-resistance Welded) 

A 0.25 0.95 0.05 0.05 0.40 0.40 0.40 0.15 0.08
B 0.30 1.20 0.05 0.05 0.40 0.40 0.40 0.15 0.08

Type F

(Furnace-welded)

A 0.30 1.20 0.05 0.05 0.40 0.40 0.40 0.15 0.08

*The total composition for these five elements shall not exceed 1.00%

Mechanical Properties

Grade A                     Grade B                     

Tensile Strength, min., psi, (MPa)                   48,000 (330)                60,000 (415)

Yield Strength, min., psi, (MPa)                     30,000 (205)                35,000 (240)

(Note: This is summarized information from ASME Specification A53. Please refer to the specific Standard or Specification or contact us for more details.)

Grade / Size / Spec

Sizes
1/4” Nominal to 24”O.D.
Wall Thickness – Schedule 10 through XXH

Chemical Properties %                        Unspecified Chemistry Max %    

C  Mn P S Si Cr Cu Mo Ni Cb V
Grade 1:  0.30 0.40-1.06 0.025 0.025
(Note:  This is similar chemistry to A53/SA53) 
Grade 6:  0.30 0.29-1.06 0.025 0.025 0.10 min 0.30 0.40 0.12 0.40 0.12, max 0.08 max

(Note:  This is similar chemistry to A106/SA106)

           

Mechanical Properties:                                             Grade 1                                  Grade 6                     

Tensile Strength, min, psi (MPa)                             55,000 (380)                60,000 (415)     

Yield Strength, min, psi (MPa)                                30,000 (205)                35,000 (240)

CVN Impact (Charpy) Test: 

Minimum Impact Test Temperature

Grade 1                       -50 (F)             -45 (C)

Grade 6                       -50 (F)             -45 (C)

Heat Treatment:

Grades 1 and 6 shall be heat treated to control their microstructure.

(Note: This is summarized information from ASME Specification A333. Please refer to the specific Standard or Specification or contact us for more details.)

Grade / Size / Spec

Sizes
Nominal Pipe Size 2″ to 24″ O.D.
Wall Thickness – Schedule 10 through 160, STD, XS, XXS. 


Standard                                           
API 5L 

Product Specification Level             PSL-2 

Steel grade                                         X52

Chemical Properties %

PSL

C, a

   Mn a

P

       S

 Si

V

Nb

Ti

Other

CEIIW

CEpcm

1

0.24

1.40

0.025

0.015

0.45

0.10

0.05

0.04

b,c

.043

0.025

2

0.28

1.40

0.03

0.03

b

b

b

 Mechanical Properties        

                                                                        API 5L PSL-1 X52                API 5L PSL-2 X52

Tensile strength, min /max, psi (MPa)         66,700(460)/ n/a                      66,700 / 110,200 

Yield strength, min /max, psi (MPa)            52,000 (300)/n/a                      52,000 / 76,900

  1. a.      For each reduction of 0.01% below the specified maximum concentration for carbon, an increase of 0.05% above the specified maximum concentration for manganese is permissible, up to a maximum of 1.65% for > grades B, but < X52; up to a maximum of 1.75% for grades >X52, but <X70; and up to a maximum of 2.00% for grade X70
  2. b.      The sum of the niobium, vanadium, and titanium concentrations shall be < 0.06%.
  3. c.       Unless otherwise agreed, 0.50% maximum for copper, 0.30% maximum for nickel, 0.30% maximum for chromium, and 0.12% maximum for molybdenum.

Select differences between PSL 1 and PSL 2:

PSL1 PSL2
CVN impact (Charpy) testing None required Required for all grades
Nondestructive inspection of seamless Only when purchaser specifies   SR4 SR4 mandatory
Certification Certificates when specified per SR15 Certificates (SR 15.1) mandatory
Traceability Traceable only until all tests are passed, unless SR15 is specified Traceable after completion of tests (SR 15.2) mandatory
Hydrostatic Test Required Required

Note: This is summarized information from API Specification 5L. Please refer to the specific Standard or Specification or contact us for more details.

Grade / Size / Spec

Grades: P-5, P-9, P-11, P-22, and P-91

Sizes

NPS 1/4” to NPS 48”

Wall Thickness – Schedules 40 through 160, STD, XS, XXS.

Unscheduled heavy wall pipe thicknesses available up to 4 inches.

Grade

C

Mn

P

S

Si

Cr

Mo

P5

0.15max

0.30-0.60

0.025

0.025

0.50 max

4.00-6.00

0.45-0.65

P9

0.15 max

0.30-0.60

0.025

0.025

0.25-1.00

8.00-10.00

0.90-1.10

P11

0.05-0.15

0.30-0.60

0.025

0.025

0.50-1.00

1.00-1.50

0.44-0.65

P22

0.05-0.15

0.30-0.60

0.025

0.025

0.50 max

1.90-2.60

0.87-1.13

P91

0.08-0.12

0.30-0.60

0.020

0.010

0.20-0.50

8.00-9.50

0.85-1.05

V 0.18-0.25

N 0.03-0.07

Ni 0.40 max

Al 0.02 max

Cb 0.06-0.10

Ti 0.01 max

Zr 0.01 max

Mechanical Properties

                                                Grade P11, P22, P5, P9                    Grade P91

Tensile strength, min, psi, (MPa)     60,000 (415)                                        85,000 (585) 

Yield strength, min, (MPa)                30.000 (205)                                        60,000 (415)

(Note: This is summarized information from ASME Specification A335. Please refer to the specific Standard or Specification or contact us for more details.)

Please Use This Form To Send Us Your Inquiries

    Name*
    Email*
    Phone
    Message

* Required